Entry-level Wi-Fi 6 (802.11ax) for outdoor and warehouse environments
Specifications
Hardware Variants
AP-565
Built-in Omni Directional Antennas
5 GHz Antennas 5.4 dBi
2.4 GHz Antennas 3.2 dBi
BLE/802.15.4 Antennas 3.3d Bi
AP-567
Built-in 90°H x 90°V Directional Antennas
5 GHz Antennas 6.8 dBi
2.4 GHz Antennas 7.1 dBi
BLE/802.15.4 Antennas 3.0 dBi
Wi-Fi Radio Specifications
AP type:
Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 2×2 MIMO and 2.4 GHz 2×2 MIMO
Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
5GHz:
Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with individual 2SS HE80 802.11ax client devices, or with two 1SS HE80 802.11ax MU-MIMO capable client devices simultaneously
2.4GHz:
Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with individual 2SS HE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously
Up to 256 associated client devices per radio
Up to 16 BSSIDs per radio
Supported frequency bands (country-specific restrictions apply):
2.400 to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz
5.850 to 5.925 GHz
5.825 to 5.875 GHz
Available channels: Dependent on configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
Note: conducted transmit power levels exclude antenna gain.
Maximum EIRP (limited by local regulatory requirements):
2.4 GHz band:
565: 29.2 dBm EIRP
567: 33 dBm EIRP
5 GHz band:
565: 31.4 dBm EIRP
567: 32.7 dBm EIRP
Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) to enable the use of multiple transmit antennas
Short guard interval for 20-MHz, 40-MHz, and 80-MHz
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Transmit beam-forming (TxBF) for increased signal reliability and range
Power
Maximum (worst-case) power consumption:
15.6W
Maximum (worst case) power consumption in idle mode:
4.2W
Maximum (worst case) power consumption in deep-sleep mode:
1.7
Power sources sold separately
Power over Ethernet (PoE+):
802.3at-compliant
When powered by 1x 802.3at, there are no restrictions
When powered by 1x 802.3af with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the POE budget and actual power. The feature restrictions can be programmed.
When powered by 1x 802.3af with IPM disabled, the AP will lower the 2.4Ghz radio to 1×1:1
Additional Interfaces
E0: 10/100/1000BASE-T (RJ-45)
Auto-sensing link speed and MDI/MDX
PoE-PD: 48Vdc (nominal) 802.3at/bt (Class 3 or higher)
802.3az Energy Efficient Ethernet (EEE)
Bluetooth 5 and 802.15.4 radio
2.4 GHz
Bluetooth 5: up to 8 dBm transmit power and -95 dBm receive sensitivity
Zigbee: up to 8 dBm transmit power and -97 dBm receive sensitivity
Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity
Visual indicator (multi-color LED): For system and radio status
Reset button: Factory reset (during device power up)
USB-C console interface
Mounting
AP-270-MNT-V1
AP-270-MNT-V2
AP-270-MNT-H1
AP-270-MNT-H2
AP-270-MNT-H3
Mechanical
AP-565
Dimensions/weight (excluding mount):
16.5 cm (W) x 16.5 cm (D) x 11 cm (H)
6.5” (W) x 6.5” (D) x 4.3” (H)
1.03 kg/2.27 lbs
AP-567
Dimensions/weight (excluding mount):
16.5 cm (W) x 16.5 cm (D) x 11 cm (H)
6.5” (W) x 6.5” (D) x 4.3” (H)
1.09 kg/2.4 lbs
Environmental
Operating:
Temperature: -40° C to +55° C (-40° F to +140° F) with full solar loading
Humidity: 5% to 95% non-condensing internal
Rated for operation in all weather conditions
Storage and transportation:
Temperature: -40° C to +70° C (-40° F to +158° F)
Operating Altitude: 3,000 m
Water and Dust: IP66/67
Salt Tolerance: Tested to ASTM B117-07A Salt Spray 200hrs
Wind Survival: Up to 165 Mph
Shock and Vibration ETSI 300-19-2-4
Regulatory Compliance
FCC/ISED
CE Marked
RED Directive 2014/53/EU
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
UL/IEC/EN 60950
EN 60601-1-1, EN60601-1-2
Railway Certs:
EN 50155:2017 – Railway Applications
EN 50121-1:2017 – Railway EMC
EN 50121-3-2 – Railway EMC
EN 50121-4:2016 – Railway Immunity
IEC 61373 ed2:2008 – Railway Shock and Vibration
For more country-specific regulatory information and approvals, please see your Aruba representative.
Regulatory Model Numbers
AP-565: APEX0565
AP-567: APEX0567
Certifications
CB Scheme Safety, cTUVus
UL2043 plenum rating
Wi-Fi Alliance certified 802.11a/b/g/n/
Wi-Fi Alliance certified Wi-Fi 6 (802.11ax)
Wi-Fi CERTIFIED™ ac (with Wave 2 features)
Passpoint® (Release 2) with ArubaOS and Instant 8.3+
