560EX Series

Aruba 560EX Series Wi-Fi 6 HazLoc Access Point (802.11ax)

Aruba 560EX Series APs deliver Wi-Fi 6 performance and security for the most extreme conditions requiring Class 1 Division 2 or ATEX Zone 2 certification.

Details and Specifications for the Aruba 560EX Series APs

Specifications

Hardware Variants
  • AP-565EX
    • Built-in Omni Directional Antennas
    • 5 GHz Antennas 5.4 dBi
    • 2.4 GHz Antennas 3.2 dBi
    • BLE/802.15.4 Antennas 3.3d Bi
  • AP-567EX
    • Built-in 90°H x 90°V Directional Antennas
    • 5 GHz Antennas 6.8 dBi
    • 2.4 GHz Antennas 7.1 dBi
    • BLE/802.15.4 Antennas 3.0 dBi
Wi-Fi Radio Specifications
  • AP type:
    • Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 2×2 MIMO and 2.4 GHz 2×2 MIMO
  • Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
  • 5GHz:
    • Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate with individual 2SS HE80 802.11ax client devices, or with two 1SS HE80 802.11ax MU-MIMO capable client devices simultaneously
  • 2.4GHz:
    • Two spatial stream Single User (SU) MIMO for up to 574 Mbps (287 Mbps) wireless data rate with individual 2SS HE40 (HE20) 802.11ax client devices or with two 1SS HE40 (HE20) 802.11ax MU-MIMO capable client devices simultaneously
  • Up to 256 associated client devices per radio
  • Up to 16 BSSIDs per radio
  • Supported frequency bands (country-specific restrictions apply):
    • 2.400 to 2.4835 GHz
    • 5.150 to 5.250 GHz
  • Maximum EIRP (limited by local regulatory requirements):
    • 2.4 GHz band:
      • 565: 29.2 dBm EIRP
      • 567: 33 dBm EIRP
    • 5 GHz band:
      • 565: 31.4 dBm EIRP
      • 567: 32.7 dBm EIRP
  • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
  • Maximum ratio combining (MRC) for improved receiver performance
  • Cyclic delay/shift diversity (CDD/CSD) to enable the use of multiple transmit antennas
  • Short guard interval for 20-MHz, 40-MHz, and 80-MHz
  • Space-time block coding (STBC) for increased range and improved reception
  • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
  • Transmit beam-forming (TxBF) for increased signal reliability and range
Power
  • Maximum (worst-case) power consumption:
    • 15.6W
  • Maximum (worst case) power consumption in idle mode:
    • 4.2W
  • Maximum (worst case) power consumption in deep-sleep mode:
    • 1.7
  • Power sources sold separately
  • Power over Ethernet (PoE+):
    • 802.3at-compliant
  • When powered by 1x 802.3at, there are no restrictions
  • When powered by 1x 802.3af with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the POE budget and actual power. The feature restrictions can be programmed.
  • When powered by 1x 802.3af with IPM disabled, the AP will lower the 2.4Ghz radio to 1×1:1
Additional Interfaces
  • E0: 10/100/1000BASE-T (RJ-45)
    • Auto-sensing link speed and MDI/MDX
    • PoE-PD: 48Vdc (nominal) 802.3at/bt (Class 3 or higher)
    • 802.3az Energy Efficient Ethernet (EEE)
  • Bluetooth 5 and 802.15.4 radio
    • 2.4 GHz
    • Bluetooth 5: up to 8 dBm transmit power and -95 dBm receive sensitivity
    • Zigbee: up to 8 dBm transmit power and -97 dBm receive sensitivity
    • Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity
  • Visual indicator (multi-color LED): For system and radio status
  • Reset button: Factory reset (during device power up)
  • USB-C console interface
Mounting
  • AP-270-MNT-V1
  • AP-270-MNT-V2
  • AP-270-MNT-H1
  • AP-270-MNT-H2
  • AP-270-MNT-H3
Mechanical
  • AP-565EX
    • Dimensions/weight (excluding mount):
      • 16.5 cm (W) x 16.5 cm (D) x 11 cm (H)
      • 6.5” (W) x 6.5” (D) x 4.3” (H)
      • 1.03 kg/2.27 lbs
  • AP-567EX
    • Dimensions/weight (excluding mount):
      • 16.5 cm (W) x 16.5 cm (D) x 11 cm (H)
      • 6.5” (W) x 6.5” (D) x 4.3” (H)
      • 1.09 kg/2.4 lbs
Environmental
  • Operating:
    • Temperature: -40° C to +55° C (-40° F to +140° F) with full solar loading
    • Humidity: 5% to 95% non-condensing internal
    • Rated for operation in all weather conditions
  • Storage and transportation:
    • Temperature: -40° C to +70° C (-40° F to +158° F)
  • Operating Altitude: 3,000 m
  • Water and Dust: IP66/67
  • Salt Tolerance: Tested to ASTM B117-07A Salt Spray 200hrs
  • Wind Survival: Up to 165 Mph
  • Shock and Vibration ETSI 300-19-2-4
Regulatory Compliance
  • FCC/ISED
  • CE Marked
  • RED Directive 2014/53/EU
  • EMC Directive 2014/30/EU
  • Low Voltage Directive 2014/35/EU
  • UL/IEC/EN 60950
  • EN 60601-1-1, EN60601-1-2
  • For more country-specific regulatory information and approvals, please see your Aruba representative.
Regulatory Model Numbers
  • AP-565EX: APEX0565
  • AP-567EX: APEX0567
Certifications
  • CB Scheme Safety, cTUVus
  • UL2043 plenum rating
  • Wi-Fi Alliance certified 802.11a/b/g/n/
  • Wi-Fi Alliance certified Wi-Fi 6 (802.11ax)
  • Wi-Fi CERTIFIED™ ac (with Wave 2 features)
  • Passpoint® (Release 2) with ArubaOS and Instant 8.3+
  • Class 1 Division 2 certified*
  • ATEX Zone 2 certified*

* Pending completion from certification lab

Minimum Operating System Software Versions
  • ArubaOS and Aruba InstantOS 8.7.1.0
Warranty
  • Limited lifetime warranty

 

 

Showing all 6 results

X