High-performance Wi-Fi 6 ideal for harsh outdoor weather conditions such as parking lots, stadiums, and public venues.
Specifications
Hardware Variants
AP-574
5 GHz: Four Nf connectors for external antenna operation
2.4 GHz: Two Nf connectors for external antenna operation
BLE/Zigbee: Integrated omnidirectional antenna and peak gain of 4.2dBi
AP-575
Built in Omni Directional Antennas
5 GHz: Antennas 5 dBi
2.4 GHz: Antennas 3.4 dBi
BLE/Zigbee: Integrated omnidirectional antenna and the peak gain of 6dBi
AP-577
Built in 90°H x 90°V Directional Antennas
5 GHz: Antennas 5.6 dBi
2.4 GHz: Antennas 6.8 dBi
BLE/Zigbee: Integrated omnidirectional antennas with peak gain of 8.4dBi
Wi-Fi Radio Specifications
AP type:
Outdoor Hardened, Wi-Fi 6 dual radio, 5 GHz 4×4 MIMO and 2.4 GHz 2×2 MIMO
Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
5GHz:
Four spatial stream Single User (SU) MIMO for up to 4.8 Gbps wireless data rate to individual 4SS HE160 Wi-Fi 6 client device (max)
Two spatial stream Single User (SU) MIMO for up to 1.2 Gbps wireless data rate to individual 2SS HE80 Wi-Fi 6 client device (typical)
Four spatial stream Multi User (MU) MIMO for up to
4.8 Gbps wireless data rate to up to four 1SS or two 2SS HE160 Wi-Fi 6 DL-MU-MIMO capable client devices simultaneously (max)
Four spatial stream Multi User (MU) MIMO for up to 2.4 Gbps wireless data rate to up to four 1SS or two 2SS HE80 Wi-Fi 6 DL-MU-MIMO capable client devices simultaneously (typical)
2.4GHz:
Two spatial stream Single User (SU) MIMO for up to
575 Mbps wireless data rate to individual 2SS HE40 Wi-Fi 6 client device (max)
Two spatial stream Single User (SU) MIMO for up to
287 Mbps wireless data rate to individual 2SS HE20 Wi-Fi
6 client device (typical)
Support for up to 512 associated client devices per radio, and up to 16 BSSIDs per radio
Supported frequency bands (country-specific restrictions
apply):
2.400 to 2.4835 GHz
5.150 to 5.250 GHz
5.250 to 5.350 GHz
5.470 to 5.725 GHz
5.725 to 5.850 GHz
5.825 to 5.875 GHz
Available channels: Dependent on configured regulatory domain
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum.
When powered by 1x 802.3at (class 4) PoE and with the IPM feature disabled, the AP will disable the other Ethernet port. In the same configuration but with IPM enabled, the AP will start up in unrestricted mode, but may dynamically apply restrictions depending on the PoE budget and actual power. The feature restrictions and order can be programmed.
Operating the AP with single or dual 802.3af (class 3 or lower) PoE source is not supported.
Mounting
AP-270-MNT-V1
AP-270-MNT-V2
AP-270-MNT-H1
AP-270-MNT-H2
AP-270-MNT-H3
Mechanical
AP-574
Dimensions/weight (excluding mount):
240mm (W) x 240mm (D) x 190mm (H) / 9.4″ (W) x 9.4″ (D) x 7.5″ (H)
2.7 kg / 6.0 lbs
AP-575
Dimensions/weight (excluding mount):
240mm (W) x 240mm (D) x 270mm (H) / 9.4″ (W) x 9.4″ (D) x 10.6″ (H)
2.5 kg / 5.6 lbs
AP-577
Dimensions/weight (excluding mount):
230mm (W) x 220mm (D) x 140mm (H) / 9.0″ (W) x 8.7″ (D) x 5.6″ (H)
2.1 kg / 4.6 lbs
Environmental
Operating:
Temperature: -40°C to +65°C / -40°F to +149°F with full solar loading
Humidity: 5% to 93% non-condensing internal
Rated for operation in all weather conditions
Storage and transportation:
Temperature: -40°C to +70°C / -40°F to +158°F
Operating Altitude: 3,000 m
Water and Dust: IP66/67
Salt Tolerance: Tested to ASTM B117-07A Salt Spray 200hrs
Wind Survival: Up to 165 Mph
Shock and Vibration: ETSI 300-19-2-4
Regulatory Compliance
FCC/ISED
CE Marked
RED Directive 2014/53/EU
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
UL/IEC/EN 60950
EN 60601-1-1, EN60601-1-2
Railway Certs:
EN 50155:2017 – Railway Applications
EN 50121-1:2017 – Railway EMC
EN 50121-3-2 – Railway EMC
EN 50121-4:2016 – Railway Immunity
IEC 61373 ed2:2008 – Railway Shock and Vibration
For more country-specific regulatory information and approvals, please see your Aruba representative.